The WinReducer Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

The WinReducer ForumLog in

FORUM

EX-100 - v3.1.0.0 [ALL]

+49
Hanyo
wyy007cn
zzony
zrs62123
victor123
mrpresident
home7ech
xxx_xxx
zumoc
Mohsan123
Echap
wangdef
takitezsdc
Dr Phil Perlmutter
mr.rao
CreativiTea
21m
GTCSD
Titanium
Mitz
The-Dark
caphp
ruby2hora
cefeide
wuya112
pedilover
winterstorm2050
drew84
xanadu73
jwl
theKramer
animeware
Geekster
audiojunk66
Lucyrier
ElChoclo
carlese
YubiGalaxy
expanium
pricecaptain
Xiaopang
jeffery8341
Torrentus
drew24
KrX
Jpm
Hen Ry
aymanalz
xithyl
53 posters

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Oh yay, for portability - now I can keep testing Win10 on my main (Win 8.1) machine. That helps a lot.

I haven't been able to get any reduced Win10 to work yet, but I don't want to open a bugs thread just yet, because I have no clue what specifically the problem is. When installing any reduced Win10, the installation goes smoothly until it gets to the "just a moment" message - after that, it keeps continously restarting and showing the same message. I have not yet been able to get to the desktop. Installing from the original, untouched ISO works. This happens no matter what I remove - I tried removing just a few things, with the same result.

So does anybody know what issues in general can cause a restart loop at that stage?

I'll try with the latest release (v0.4.0.0) and see if it still happens.

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
aymanalz wrote:
Oh yay, for portability - now I can keep testing Win10 on my main (Win 8.1) machine. That helps a lot.

I haven't been able to get any reduced Win10 to work yet, but I don't want to open a bugs thread just yet, because I have no clue what specifically the problem is. When installing any reduced Win10, the installation goes smoothly until it gets to the "just a moment" message - after that, it keeps continously restarting and showing the same message. I have not yet been able to get to the desktop. Installing from the original, untouched ISO works. This happens no matter what I remove - I tried removing just a few things, with the same result.

So does anybody know what issues in general can cause a restart loop at that stage?

I'll try with the latest release (v0.4.0.0) and see if it still happens.



hey i think ist the same Problem as i mentioned here:

[You must be registered and logged in to see this link.]


but since Version 0.4 it seems to work for me

i just changed Version 0.3 to 0.4 and also changed my key from an genetic to my own personal one and removing 1 component or everything i want and Windows 10 installs just fine

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
KrX wrote:


hey i think ist the same Problem as i mentioned here:

[You must be registered and logged in to see this link.]


but since Version 0.4 it seems to work for me

i just changed Version 0.3 to 0.4 and also changed my key from an genetic to my own personal one and removing 1 component or everything i want and Windows 10 installs just fine


Nope, still getting the same error. Crying or Very sad

I used Version 0.4, and also did not activate any unattended options. (Including a key.)

Same problem, except that it now keeps asking me to enter a key, before showing "just a moment" and rebooting, and asking me enter the key again. (I'm entering a generic key. I am trying to install it on a different machine, which has a license, and not on the machine I am experimenting with winreducer.)

Anybody else facing this issue? Has it happened before, and if so, what was causing it?

Here is my WCCF:

[You must be registered and logged in to see this link.]

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
it seems that different Editions Need to Keep different files so that the start menu will work. so if you use a different Edition than me (pro N) also other components will break your start menu

get a look here

[You must be registered and logged in to see this link.]

maybe one of this components mentioned there is breaking your start menu

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
^^

To clarify, is that thread only about the start menu on the desktop? I cannot finish installing Windows at all.

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
aymanalz wrote:
^^

To clarify, is that thread only about the start menu on the desktop? I cannot finish installing Windows at all.



ah yes i made a mistake xD

but i was getting the same Problem before and now its gone. i will try some other iso´s and maybe i can get that Problem again

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Hey guys, I'm doing my best to propose today a new build ... and I could tell that this build will still be an alpha build with some bugs unsolved, but start menu should be ok.

For the next build, I will update the development branch to v0.5.x.x (beta) .... because I've started the deployment of the new removing engine v3.00 in EX-100, and it will take me some time testing it.

So you will see, during next week, many new "Closed Beta" builds available to help me in this task ... Smile ... new information soon !

----------------------------------------

@xithyl : have a look in the 1st post, the changelog is available for each builds ... Wink

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Hello,

"WinReducer EX-100 - v0.4.1.0" is available !

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Hello,

"WinReducer EX-100 - v0.4.2.0" is available !

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Hello,

"WinReducer EX-100 - v0.4.3.0" is available !

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
the new version was not shown as an update -> after updating an update is displayed

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Hey Hen Ry,

Don't worry that's coming ... Wink

EDIT : it should be OK.

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
I do not worry  bounce

Edit: Yes, works

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Very Happy

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Hello guys,

I have a good news, I'm hardly working on the new EX-100 build, and especially integrating the new removing engine, which will be by the way the v3.02 ... Wink

So, about it, my first tests revealed that I have a removing speed improvement by around 500% (maybe more) for all computer, because I've worked on improving the removing speed not only for fast computers (which will have a new "INSANE" removing profile : I've removed all WinReducer components and created the according ISO in less the 20 minutes !) but also for the slower computers, and the result should be also interesting ... Wink

I'm also working on all components cleanup (to reduce installation sizes), and solving bugs ... so this is a huge work, but it will be real in few days with an alpha build to test during next week, so please stay tune, there will be interesting things which are coming with a new software and EX-Series software updates ... Smile


Thank you guys, for your everyday support on the WinReducer forum : feedbacks, bugs reports, all your interesting discussions ...

EDIT : of course the new removing engine will be deployed for all other EX-Series software ... Wink

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
winterstorm2050 wrote:
So, about it, my first tests revealed that I have a removing speed improvement by around 500% (maybe more) for all computer, because I've worked on improving the removing speed not only for fast computers (which will have a new "INSANE" removing profile : I've removed all WinReducer components and created the according ISO in less the 20 minutes !) but also for the slower computers, and the result should be also interesting ... Wink


500 % thats really insane xD

haha in the feature it maybe will be finished right before clicking the appy button xD

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Yes, the insane profile will be a really insane speed ... Wink ... there will be also many interesting cleanup improvements, new components, bugs solved, so a bug update ... Smile

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
winterstorm2050 wrote:
Yes, the insane profile will be a really insane speed ... Wink ... there will be also many interesting cleanup improvements, new components, bugs solved, so a bug update ... Smile


cool Wink cant wait till next week bounce

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Winterstorm,

You are INSANE, I am INSANE, everybody are INSANE with you, you are doing an amazing job, next week will be an INSANE week. Smile Smile Smile

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Sounds like the insane profile could be multithreaded. My hexcore CPU will be pleased Smile

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Just tested the newest Alpha with build 10240.. doesn't seem to remove any Modern Metro Apps I selected ... Does that have anything to do with the "Protect Modern App" Preset enabled? Does "Protect Modern App" only protect the essential files to run Metro apps or protect all the modern apps from being deleted?

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Hello guys,
winterstorm2050 wrote:
So, about it, my first tests revealed that I have a removing speed improvement by around 500% (maybe more) for all computer, because I've worked on improving the removing speed not only for fast computers (which will have a new "INSANE" removing profile : I've removed all WinReducer components and created the according ISO in less the 20 minutes !) but also for the slower computers, and the result should be also interesting ... Wink

About the new Removing Engine v3.02, I would like to precise that if you have a slower computer you will hope the better speed improvements (200% to 500% : estimated gain), even with "Default" profile.
And for faster computers, the speed gain should be around 50% with "Highest" profile and even more with "Insane" profile ... Smile

Xiaopang wrote:
Sounds like the insane profile could be multithreaded. My hexcore CPU will be pleased Smile

This will be the next step in Removing Engine v4.00... Wink

pricecaptain wrote:
Just tested the newest Alpha with build 10240.. doesn't seem to remove any Modern Metro Apps I selected ... Does that have anything to do with the "Protect Modern App" Preset enabled? Does "Protect Modern App" only protect the essential files to run Metro apps or protect all the modern apps from being deleted?

There are some troubles with "EX-100 - v0.4.3.0", I'm fixing them and this will be available in v0.5.0.0 ... Smile

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Hello friend.
First thanks for dedicating your work to this application and for free. And second thanks for taking your time to replying to my emails.

I tried to enable this option on Remove tab Tweaks->System - Disable User Account Control (UAC). On first boot logo where you need to put serial key and choose other definitions Windows restart and goes to bootloop on that menu. If anyone can try this just to be sure. btw i have been testing this on Virtual Machine.
Probably it is programming error since it can't let pass to desktop for first time.


Thanks winterstorm2050,
Cheers to all.

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
0.5 plzzzz

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Hello dudes.

I found one little bug: 
When i delete some modern apps (from Remove - Modern UI Apps) i think they've should appear as blank space (invisible) on Start Menu and not some shortcut to Store. Because when i click on any of them i just go directly to Windows Store.

EX-100 - v3.1.0.0 [ALL] - Page 2 Error11


This version is actually very good just need to add/change a little things. And maybe instead of most of tweaks are in one location aKa Tweaks tab maybe disperse some of them. Because in my opinion these are tweaks most used for an normal average user. 
Yes! One more thing there is still missing some options on Winreducer when user can customizing settings after installation on 1st boot.


Cheers.

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Waiting for 0.5.0.. Very Happy

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
@winterstorm2050 almost a month with no posts.. are you alright???

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Hello guys,

Yes, I feel good, and I'm back !

An alpha build should be available Monday ... Wink

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Hey guys,

I confirm that Monday 28 September, I will release an alpha test build in the forum ... there will be a special procedure test to ensure the better result, because I will also provide a wccf test to be used with this v0.4.4.3 (forum alpha) ... see you tomorrow my friends !

descriptionEX-100 - v3.1.0.0 [ALL] - Page 2 EmptyRe: EX-100 - v3.1.0.0 [ALL]

more_horiz
Ok winterstorm2050. Bring it on  I'll be testing that version  Very Happy
privacy_tip Permissions in this forum:
You cannot reply to topics in this forum