Startup Error

Hey Winter!

I have now tried several versions of your WLAN Backup program and it all starts well for the first time and I can download and install 7-zip perfectly. But after that when I want to start the program to actually save my WLAN profiles I get the following .Net Framework error:

Unhandled exception has occured in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.

InvalidArgument=Value of '0' is not valid for 'SelectedIndex'.

Details:

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ArgumentOutOfRangeException: InvalidArgument=Value of '0' is not valid for 'SelectedIndex'.
Parameter name: SelectedIndex
at System.Windows.Forms.ComboBox.set_SelectedIndex(Int32 value)
at WinReducerESWlanBackupRestore.Form_Main.List_Launcher()
at WinReducerESWlanBackupRestore.Form_Main.Startup_Language()
at WinReducerESWlanBackupRestore.Form_Main.Form_Main_Load(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1055.0 built by: NETFXREL2
CodeBase: [You must be registered and logged in to see this link.]
----------------------------------------
WinReducerESWlanBackupRestore
Assembly Version: 1.0.5860.18646
Win32 Version: 1.2.0.0
CodeBase: [You must be registered and logged in to see this link.]
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1055.0 built by: NETFXREL2
CodeBase: [You must be registered and logged in to see this link.]
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1055.0 built by: NETFXREL2
CodeBase: [You must be registered and logged in to see this link.]
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1055.0 built by: NETFXREL2
CodeBase: [You must be registered and logged in to see this link.]
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1055.0 built by: NETFXREL2
CodeBase: [You must be registered and logged in to see this link.]
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1055.0 built by: NETFXREL2
CodeBase: [You must be registered and logged in to see this link.]
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1055.0 built by: NETFXREL2
CodeBase: [You must be registered and logged in to see this link.]
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

configuration>
system.windows.forms jitDebugging="true" />
/configuration>'

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.



I am running Windows 7 SP1 with only .net Framework installed and reduced with WinReducer v.1.10.0.

I have also found some forums where there were similar problems:

[You must be registered and logged in to see this link.]

Maybe this will help you. I think this will also solve the following problem I had with WinReducerEX 7.0 described here:
[You must be registered and logged in to see this link.]

All the best, keep up the good work and thank you for your time!

Markus

Hello,

I will release the fix tomorrow ... this was a tiny error I've made !

I'm counting on you for the report after the release.

Thank you very much for your fast response!

I will test it as soon as I find some time and post the results!

Markus

Hello,

v1.3.1.0 is available with the fix

Works now perfectly for me Winter!

Thank you for your work. And pleas check if the same bug is present in the other WinReducer products

Only one more thing I noticed with the older and this new version:
If I install 7-Zip or change the language, the program ends like it should but does not restart. Maybe this is only because of my system configuration or software I installed that may block the restart, or you have made it like this to prevent multiple proceses?

All the best,
Markus

Ok I now found out, that I can not restore the saved profiles. If I go to "Load profiles" I can not select anything because the Load Button aswell as the dots of the User fields (all and current) are greyed out.

1 - About the restart trouble (while changing language for example) ... it's working for me. Have you updated all languages files ?

2 - It seems I have the same trouble (load or delete button) as you. I'm on it right now

About point 2, I've fixed it, and I will release the new build in few hours

Concerning point 2: I am glad that it was solveable

Concerning point 1: I did the following:
Downloaded the sofware from your homepage, unpacked it in the root folder (D\ startet it the first time and downloaded 7-zip. This worked well everything installed and I saw the message that everything was completet successfully. Then I clicked on "ok" and now the program closes - but it does not start up again. I need to go into the folder and start the program manually (which for me is not a problem, but for others it might be disturbing)
Also when I start the program, select another language the program closes, but it does not restart itself. Once again I need to start it manualy.

All the best,
Markus

I released v1.3.2.0, so point 2 should be definitively fixed

About point 1, I'm not able to reproduce the bug, even with a fresh "ES - Wlan Backup and Restore" installation.

Thank you very much anyway for your precious feedback

Hello Winter!

I am sorry but I have some good news and some bad ones.

First of the good:
- It seems like the restart is working if you change the language now.
- Also after I download 7-zip and the message pops up where it says "successfully completet" I found out that if I press the close button (little x on the right top) instead of "ok" it restarts aswell like it should

Now the bad:
- I got a new error message concerning .Net Framework:

Unhandled exception has occured in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.

String reference not set to an instance of a String.

Details:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ArgumentNullException: String reference not set to an instance of a String.
Parameter name: source
at System.Globalization.CompareInfo.IsPrefix(String source, String prefix, CompareOptions options)
at System.String.StartsWith(String value, StringComparison comparisonType)
at System.String.StartsWith(String value)
at WinReducerESWlanBackupRestore.Form_Main.List_Launcher()
at WinReducerESWlanBackupRestore.Form_Main.Startup_Language()
at WinReducerESWlanBackupRestore.Form_Main.Form_Main_Load(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1055.0 built by: NETFXREL2
CodeBase: [You must be registered and logged in to see this link.]
----------------------------------------
WinReducerESWlanBackupRestore
Assembly Version: 1.0.5914.40994
Win32 Version: 1.3.2.0
CodeBase: [You must be registered and logged in to see this link.]
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1055.0 built by: NETFXREL2
CodeBase: [You must be registered and logged in to see this link.]
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1055.0 built by: NETFXREL2
CodeBase: [You must be registered and logged in to see this link.]
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1055.0 built by: NETFXREL2
CodeBase: [You must be registered and logged in to see this link.]
----------------------------------------
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1055.0 built by: NETFXREL2
CodeBase: [You must be registered and logged in to see this link.]
----------------------------------------
System.Core
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1055.0 built by: NETFXREL2
CodeBase: [You must be registered and logged in to see this link.]
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.6.1055.0 built by: NETFXREL2
CodeBase: [You must be registered and logged in to see this link.]
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

configuration>
system.windows.forms jitDebugging="true" />
/configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

---------------------------------------------------------------------------

This error shows up when I start Wlan Backup and Restore after I have successfully downloaded the 7-Zip files.
Also sometimes I can manage to get into the main menu, but when I press "Backup" this error shows up aswell.

Hello,

There are no trouble

It seems you are using Net 4.6, I'm still under 4.5.2, but I will have a look at this as soon as possible, thanks for the report

Yes, I am using .Net Framework 4.6.1 with the latest security updates installed. Sorry that I forgot about that!

All the best,
Markus

It is quite funny that version 1.3.1.0 seems to work good for me apart from the restoring problem but whatever you have changed to solve the restoring bug in version 1.3.2.0 it seems to have raised this new problem...

Hope you can fix it soon!

All the best,
Markus